Hi All,
Tried milling a hex on this thing for the first time.
Although the book says that it should auto comp for the cutter diameter, I had to offset my ½" endmill by ¼" to get the correct size.
Using a LFT Face option. I have an STP for the first line, and after that all lines for a FPT-R and an angle.
For some reason the flats on the hex aren't a straight line, but are rounded
Anyone experience this before?
Thanks!
![Click image for larger version.
Name: IMG_3992.jpg
Views: 8
Size: 19.8 KB
ID: 277788]()
![Click image for larger version.
Name: IMG_3991.jpg
Views: 7
Size: 17.2 KB
ID: 277789]()
![Click image for larger version.
Name: IMG_3990.jpg
Views: 8
Size: 16.5 KB
ID: 277790]()
![Click image for larger version.
Name: IMG_3989.jpg
Views: 6
Size: 16.8 KB
ID: 277791]()
Tried milling a hex on this thing for the first time.
Although the book says that it should auto comp for the cutter diameter, I had to offset my ½" endmill by ¼" to get the correct size.
Using a LFT Face option. I have an STP for the first line, and after that all lines for a FPT-R and an angle.
For some reason the flats on the hex aren't a straight line, but are rounded
Anyone experience this before?
Thanks!
