I have a program that was used before on a Dynapath Delta 2000. I need help to convert the program to work on my Mazak VTC mill with M32b in EIA mode. This Mazak did not come with EIA manuals. Any help would be appreciated, this is my first post on here. Below is one of the programs. Thanks!
N0001(T)CLEARANCE BORE D16$
N0002(9)M06E01$
N0003(T)CLEAR 6.425 ORING 5.550$
N0004(T)ORING DIA. 3.241$
N0005(9)T3$
N0006(9)M13S600$
N0007(0)X-.5Y0Z1$
N0008(0)X0Y0$
N0009G86X0Y0Z-5.550R.100O1.000F3
N0010G86X3.307
N0011G86X6.6141
N0012G86X9.9212
N0013(9)M05$
N0014(9)M09$
N0015(9)M30$
N0001(T)CLEARANCE BORE D16$
N0002(9)M06E01$
N0003(T)CLEAR 6.425 ORING 5.550$
N0004(T)ORING DIA. 3.241$
N0005(9)T3$
N0006(9)M13S600$
N0007(0)X-.5Y0Z1$
N0008(0)X0Y0$
N0009G86X0Y0Z-5.550R.100O1.000F3
N0010G86X3.307
N0011G86X6.6141
N0012G86X9.9212
N0013(9)M05$
N0014(9)M09$
N0015(9)M30$