Hello -
We have a customer supplied program and they have the same machine (Make, Model) as my place does and we are using their program (as instructed). It's on a Mazak Horizontal Machining Center with a Matrix Nexus control. We are using EIA/ISO format.
They don't use G43's in their program, so I was hoping someone could tell me how the machine picks up length offsets without a G43. Here is a snippet of their program:
N370 M6
N380 M58
N390 G65P9050
N400 S827M3
N410 G0G54.1P1
N420 G90G17X-.0004Y8.58268B0.T19
N430 Z4.6285
N440 G94G64G42D18G1X3.0196F49.62
N450 G2X-6.17619Y13.69685I-6.02J0.
N460 G1X-3.0004
The Sub Program 9050 is just a program that makes sure the correct work offsets are loaded for the pallet that is in the machine. There are no G43's, just an "IF[#51997EQ2]GOTO2" and a bunch of #7001=#811, #7002=#812, etc.
Anyway, what is a G58 on this control? I can't find a definition even if I google it.
Thanks for any help.
- Paul
We have a customer supplied program and they have the same machine (Make, Model) as my place does and we are using their program (as instructed). It's on a Mazak Horizontal Machining Center with a Matrix Nexus control. We are using EIA/ISO format.
They don't use G43's in their program, so I was hoping someone could tell me how the machine picks up length offsets without a G43. Here is a snippet of their program:
N370 M6
N380 M58
N390 G65P9050
N400 S827M3
N410 G0G54.1P1
N420 G90G17X-.0004Y8.58268B0.T19
N430 Z4.6285
N440 G94G64G42D18G1X3.0196F49.62
N450 G2X-6.17619Y13.69685I-6.02J0.
N460 G1X-3.0004
The Sub Program 9050 is just a program that makes sure the correct work offsets are loaded for the pallet that is in the machine. There are no G43's, just an "IF[#51997EQ2]GOTO2" and a bunch of #7001=#811, #7002=#812, etc.
Anyway, what is a G58 on this control? I can't find a definition even if I google it.
Thanks for any help.
- Paul