Clik here to view.
Machine Axis, Timer, and Ladder parameter list
Dear All, I have the operating manual for Mazatrol Fusion 640T (Parameter List), but unfortunately it doesn't include Machine Axis (BS1 to BS32), Timer (T1 to T64), and Ladder (R1 to R160) parameter...
View ArticleClik here to view.
Mazak SQT10M Driven Tooling Offsets
I have been running 2 axis Mazak's for quite some time but have just acquired a SQT10M. It is my first go with driven tooling and I have a shaped profile as shown to put on the front face of the part....
View ArticleNeed help with EIA on T+ Y axis lathe
Can anyone give me some generic code to get me moving? All I'm trying to do (with an od live tool) is move to an x/z position, y position, cut a circle. The reason I'm not doing this in mazatrol is I'm...
View ArticleAdjusting A axis zero position on Variaxis (640m 5x)
I've got about .010" runnout across the top of the work table (front to back), with the A axis at its home position. Anyone have experience with this?
View ArticleClik here to view.
SQT 10M Driven Tooling Knuckle
As I have found a lot of useful information on this site I hope this might be helpful to somebody. Having had our new SQT 10M arrive with us last week I have spent the last few days inspecting and...
View ArticleClik here to view.
Integrex I 200 Braoching Program
I am trying to come up with a broaching program that will run on my Integrex with a Matrix control. I have been doing it as a manual program in mazatrol but it is a lot of lines. Thanks Howard
View ArticleClik here to view.
Mazak M4 front turret repair
My step father and I have just started a machine shop. We are currently employed by another shop until we are too busy in our own shop to continue. One of the cnc machines we bought is a 1979-1980...
View Articleoffsetting tool dia. in EIA.
Trying to convert to EIA programming from Mazatrol. We programmed in gcode with a .5" endmill but its a re ground. I go to tool data to change the actual diameter but when I re cut the measurment...
View ArticleChamfer question???
Im running a Mazak SMM2500 with Mazatrol 640 interface. I use it with a combination of NX. I am currently training a coworker on Mazatrol and Ive never written a chamfer manually, always used NX for...
View Articledefine a tool in table
i am cutting plastic with a cut -off bar using an aluminum insert . i need to know how to define the tool to allow me to cut in z axis along the length of the part. If i define as cut-off bar, i can...
View Articleupgrading an M5 pendent
I found an older M5 mazak 18"x80" cnc lathe, 83' vintage in good looking shape, The 3.5" hole and 30 HP make it a very alluring machine at a reasonable price. The big drawback for me is the older...
View ArticleStrange problem grooving on QT10 T1
Wrote a program for one of the lathes the other day and just wanted to part off blanks, so I used "0" grooving cycle as I usually do. The machine ran the cycle until the groove, indexed the tool and...
View ArticleCouple mazatrol programming questions.
Ive got a few questions regarding some things in mazatrol. First off on the WPC, we always set the th to 0. We played around changing it around to 30 and 45 and it changed where the machine went to on...
View ArticleMazak VCU problem
Came into work today with a nice little problem I have no answer to. We have been running a short production job on our Mazak VCU 400A 5X that was running great yesterday. We had to break into it to...
View ArticleMobile Long-Life Coolant
We have a mix of Mazak turning centers (QTN-MY's, QTN-MSY's and Multiplexes). I am working on a preventative & routine maintenance program that we can schedule with JobBoss. I have tried using the...
View ArticleQT-15 Work Light
1990 QT15 with a T32-2 control. What would I dig into first to make my work light work right? Used to work fine, then it quit coming on when the machine was turned on. Turning it off and back on would...
View ArticleQt8 question about spindle lubrification
Hello, I have a mazak Qt8 t2. And I have a question on the spindle lubrification. After a crash, we've change spindle's bearings, and I have no informations on the spindle's lubrification. Somebody...
View ArticleReaming on a QT Nexus 100 MS
Hi, I am machining a part out of aluminum 6061 that requires a bore .6876/.6866 1.95 deep. I am having some issues with tapered bores but not all the time. If it was all the time I could program in a...
View Article
