Hello everyone.
I am working with MAZAK Integrex machnines and sometimes i need to machine some parts with a turning tool, using different B-angle.
We are using eia program format for our machines.
Problem that i got is when operator using measured tool in Mazatrol(tool measured in B-axis = 0°) he gets exactly those coordinates that he had progrmmed no matter what B-angle is set while machining, but when we use our eia program we get tool dislocation in X and Z coordinates in amount of tool radius ( for example: RIGHT STANDART turning tool (VCMT160402) and B-axis set to 101 degrees, we got +0.16 ).
We get all the parameters, like the manual says, to use mazatrol TOOLDATA with eia programs, but machine still didnt recalculate tool point properly.
We using T00.0M06 Tool call format in our programs.
I know i can teach tool in a different angle than 0°, but it works only for that time when we machine parts in same angle that tool was measured.
What can be wrong?
What am i missing?
I am working with MAZAK Integrex machnines and sometimes i need to machine some parts with a turning tool, using different B-angle.
We are using eia program format for our machines.
Problem that i got is when operator using measured tool in Mazatrol(tool measured in B-axis = 0°) he gets exactly those coordinates that he had progrmmed no matter what B-angle is set while machining, but when we use our eia program we get tool dislocation in X and Z coordinates in amount of tool radius ( for example: RIGHT STANDART turning tool (VCMT160402) and B-axis set to 101 degrees, we got +0.16 ).
We get all the parameters, like the manual says, to use mazatrol TOOLDATA with eia programs, but machine still didnt recalculate tool point properly.
We using T00.0M06 Tool call format in our programs.
I know i can teach tool in a different angle than 0°, but it works only for that time when we machine parts in same angle that tool was measured.
What can be wrong?
What am i missing?