Mazak Slant Turn 15 Turret Alignment & Other issues
Hi, I am trying to realign the turret on a Mazak Slant Turn 15, vintage 1984. I had to remove the turret and the body to replace two studs that were stripped. The studs are inaccessible with the turret...
View ArticleClik here to view.
Mazak Slant Turn 15 Turret Rebuild and Alignment
Hi, I am trying to rebuild and realign the turret on a mazak slant turn 15, vintage 1984. I have removed and replaced the studs that were hidden behind the turret and too long to remove without...
View ArticleMazak vqc-20/50b apc
Hi guys, long time lurker, but I believe this is my first post. At any rate ,I just purchased a MAZAK VQC-20/50B at an auction with a pallet changer. does anyone know if I can remove the pallet changer...
View ArticleHelp need to tool change in front of part with out going home Qt250 Mazatrol 640
Hello Looking to move away from part, tool change and go back to cutting. Is there a way to do this on the Mazatrol 640 side. If not how can I use EIA in conjunction with the conversional side. Have...
View ArticleVC-500A Smooth Question
Does anyone know how to get the rotating table back to home if we get a power failure during rotation? I have had two Mazak repair people here fixing other machine issues and they had no clue. Just got...
View ArticleCalibration of Renishaw probe in Mazak Matrix Nexus 2
Calibration of Renishaw probe in Mazak Matrix Nexus 2 Calibrated the probe after: Indicating the probe true; sweeping a known diameter ring & establishing it as a datum/work offset; running the...
View ArticleNew Mazak Purchase
I just received a quote on a new machine from the local Mazak dealer which is a corporate tech center . The salesman said that the price is FOB Kentucky and that I would have to arrange transport from...
View ArticleClik here to view.
T2 programing help
I'm stumped. I just need to get the program to optionally stop so I can measure the part before I part it off. On my T-32 and T Plus controls I've always just used the MNP process. It moves the tools...
View ArticleClear EIA table offsets on tool removal
I'm fairly new to Mazatrol and this has bitten me already so many times! Is there a parameter to clear EIA offsets automatically when I erase a Mazatrol tool? Currently the machine is set so that it...
View ArticleError 774 Designated Tool Not Found
Does anyone know why a tool call line with prestage, such as T0404.1301 B8 will result in error 774 DESIGNATED TOOL NOT FOUND? Manual says: "This alarm indicates that the program-designated tool has...
View ArticleGenerating full nose radius od grooving sequence
Hello, I am currently tasked to make some grooves! Usually quite simple, however I can not get rid of the chatter. So to avoid all the nonsense leading up to this, I'm looking to figure out how to...
View ArticleMazak 510c-II Reset Y Axis Home Procedure.
Hi All, I Have a VCN-510C-II with a Matrix control that has lost Y axis home position. Soft limit is in the wrong place. Both switches are functional. Does anyone have experience resetting this? Thank...
View ArticleKm63xmz
Hi ,Everyone I just purchased a Mazak Integrex 200SY. I need holders does anyone have a source other than Ebay or anyone have extras the want to sell. Thanks
View Article2008 Mazak 400-II VMC will not home
New to me machine, powered up for first time yesterday, no errors or alarms, axis move ok. But with home button activated (and showing on screen) pressing negative axis will not automatically go to...
View ArticleAre Mazak VMC's supposed to exhaust air from the spindle all the time ?
Seems dumb if so, best to leak air only when spindle is turning.... anyway to change the "eternal air leak" situation ? (2008 Mazak 410-II)
View ArticleMazak sqt 200 mys post setup in feature cam
I am lookin for someone that is an expert in setting up the post in feature cam for a MAZAK SQT 200 MYS.
View ArticleQT20 Lath Way cover seals - just brass or?
I'm in the middle of doing some additional cleanup on a QT20 I bought a while back and when I removed old way cover seals they were rubber and there was an additional cover/flap over them. I'm guessing...
View Articlekm 63 converted to KM63XMZ
Has anyone heard of converting KM63 to KM63xmz by drilling locating holes in flange ? I read somewhere its possible,but not sure of the dependability of the source. Any help is appreciated
View ArticleClik here to view.
Mazatrol Unfinished Tool Set - Alarm 814
Hi All, I'm new to Mazak lathes, and trying to get my first program running on a QT15N that has a T32-2 control. I'm just getting the lathe going. The seller said that he had just replaced the...
View Article